冷却系统清洗剂

使用方法

"启动发动机至正常温度后关闭;将本品摇匀后按每瓶配比4-6升防冻液的比例加入水箱中;启动发动机，运转20分钟后，关闭发动机;

放出冷却液，再用清水冲洗至放出的水不带锈迹为止，然后加注新的防冻液。

Usage:

Start the engine to normal temperature; shake the product well to the water tank at the ratio of 4-6 liters of antifreeze per bottle; start the engine for 20 minutes;

Release the coolant, rinse with water until the released water does not rust, and then fill with new antifreeze."

Product performance：

Using high technology and imported raw materials, no damage to the components of the cooling system.It can thoroughly clean and remove the scale and rust scale of the cooling system, quickly increase the cooling function of the cooling system, and solve the faults such as water tank boiling and engine overheating.